Gigabyte MZ01-CE1 - Page 59

- 59 - BIOS Setup
Parameter
Description
NICConguration
Press[Enter]tocongureadvanceditems.

Link Speed
– Allowsforautomaticlinkspeedadjustment.
– Options available: Auto Negotiated, 10 Mbps Half, 10 Mbps Full, 100
Mbps Half, 100 Mbps Full. Default setting is Auto Negotiated.

Wake On LAN
– EnablespoweronofthesystemviaLAN.Notethatconguring
Wake on LAN in the operating system does not change the value of
this setting, but does override the behavior of Wake on LAN in OS
controlled power states.
– Options available: Enabled, Disabled. Default setting is Enabled.
Blink LEDs
IdentiesthephysicalnetworkportbyblinkingtheassociatedLED.
Pressthenumerickeystoadjustdesiredvalues.
UEFI Driver
DisplaysthetechnicalspecicationsfortheNetworkInterfaceController.
Adapter PBA
DisplaysthetechnicalspecicationsfortheNetworkInterfaceController.
Device Name
DisplaysthetechnicalspecicationsfortheNetworkInterfaceController.
Chip Type
DisplaysthetechnicalspecicationsfortheNetworkInterfaceController.
PCI Device ID
DisplaysthetechnicalspecicationsfortheNetworkInterfaceController.
PCI Address
DisplaysthetechnicalspecicationsfortheNetworkInterfaceController.
Link Status
DisplaysthetechnicalspecicationsfortheNetworkInterfaceController.
MAC Address
DisplaysthetechnicalspecicationsfortheNetworkInterfaceController.
Virtual MAC Address
DisplaysthetechnicalspecicationsfortheNetworkInterfaceController.