BIOS Setup - 66 -
Parameter Description
Action on BIST Failure
Action to take when a CCD BIST failure is detected.
Options available: Do nothing, Down-CCD, Auto. Default setting is Auto.
Fast short REP MOVSB
Default is 1, cab be set to zero for analysis purpose as long as OS supports
it.
Options available: Disabled, Enabled. Default setting is Enabled.
Enhanced REP MOVSB/
STOSB
Default is 1, cab be set to zero for analysis purpose as long as OS supports
it.
Options available: Disabled, Enabled. Default setting is Enabled.
REP-MOV/STOS Streaming
Allows REP-MOVS/STOS to use non-caching streaming stores for large
sizes.
Options available: Disabled, Enabled. Default setting is Enabled.
X3D
Override of X3D technology.
Options available: Auto, Disable, 1 stack, 2 stacks, 4 stacks. Default setting
is Auto.
IBS hardware workaround
Sets if using IBS execution sampling without software workaround for
erratum 1,285. May impact performance.
Options available: Auto, Enabled. Default setting is Auto.
To Next Page
Loading...
Need help?
General
