Gigabyte MZ01-CE1 - Page 83

- 83 - BIOS Setup
2-3-3-1-6 Phy Conguration
Parameter Description
PhyConguration
PMU Training
Press[Enter]tocongurePMUTraining.

DFE Read Training
– Perform 2D Read Training with DFE on.
– Options available: Auto, Enable, Disable. Default setting is Auto.

FFE Write Training
– Perform 2D Write Training with FFE on.
– Options available: Auto, Enable, Disable. Default setting is Auto.

PMU Pattern Bits Controls
– Options available: Auto, Manual. Default setting is Auto.