Gigabyte MZ71-CE0 - Page 11

- 11 - Hardware Installation
Storage Interface
 4 x 7-pin SATA 6Gb/s ports
 3 x SlimSAS (with 12 x SATA 6Gb/s or 3 x NVMe PCIe Gen3 x4) ports
Note!
Please go to BIOS Setup section, Advanced>PCI Subsystem
Settings for advanced conguration manually.
Internal I/O
Connectors
 1 x 24-pin ATX main power connector
 2 x 8-pin ATX 12V power connectors
 5 x SlimSAS connectors
 1 x M.2 slot
 2 x CPU fan headers
 4 x System fan headers
 1 x USB 3.0 header
 1 x USB 2.0 header
 1 x COM_2 header
 1 x TPM header
 1 x Front panel header
 1 x PMBus connector
 1 x IPMB connector
 1xClearCMOSjumper
 1xBIOSrecoveryjumper
Rear I/O
Connectors
 2 x USB 3.0
 1 x VGA
 1 x COM_1
 2 x RJ45
 1 x MLAN
 1 x ID button with LED
TPM
 1 x TPM header with SPI interface
 Optional TPM2.0 kit: CTM010
Board
Management
 Aspeed® AST2500 management controller
 GIGABYTE Management Console (AMI MegaRAC SP-X) web interface
Form Factor
 E-ATX
 305W x 330D (mm)
GIGABYTE reserves the right to make any changes to the product specications andproduct-related
information without prior notice.