Gigabyte MZ71-CE0 - Installing and Removing a Memory Module; DIMM Population Table

Hardware Installation - 14 -
1-4-2 Installing and Removing a Memory Module
Before installing a memory module, make sure to turn off the computer and unplug the
power cord from the power outlet to prevent damage to the memory module.
Be sure to install DDR4 DIMMs on to this motherboard.
Follow these instructions to install a DIMM module:
1. Insert the DIMM memory module vertically into the DIMM slot and push it down.
2. Close the plastic clip at both edges of the DIMM slots to lock the DIMM module.
3. Reverse the installation steps when you want to remove the DIMM module.
1
2
2
DIMMs Populated
DIMM Frequency (MT/s)
1R
2R
2DR
1.2V
1
1 -- 3200
-- 1 3200
2
2 -- 2933
1 1 2933
-- 2 2933
1-4-3 DIMM Population Table
RDIMM Maximum Frequency Supported Table