Gigabyte MZ71-CE0 - Page 67

BIOS Setup - 67 -
Parameter Description
MBACongurationMenu
(continued)

Boot Retry Count
– Selects the number of boot retries.
– Options available: No Retry, 1 Retry, 2 Retries, 3 Retries, 4 Retries,
5Retries,6Retries,IndeniteRetries.DefaultsettingisNo Retry.
iSCSIBootConguration
Menu
Press[Enter]tocongureadvanceditems.
Blink LEDs
IdentiesthephysicalnetworkportbyblinkingtheassociatedLED.
Pressthenumerickeystoadjustdesiredvalues.
Link Status
Speciesthelinkstatusoftheport.
Physical Link Speed
DisplaysthetechnicalspecicationsfortheNetworkInterfaceController.
Chip Type
DisplaysthetechnicalspecicationsfortheNetworkInterfaceController.
PCI Device ID
DisplaysthetechnicalspecicationsfortheNetworkInterfaceController.
Bus:Device:Function
DisplaysthetechnicalspecicationsfortheNetworkInterfaceController.
Permanent MAC Address
Displays the MAC address of the Ethernet controller.
Virtual MAC Address
Displays the virtual MAC address of the Ethernet controller.