Gigabyte MZ71-CE0 - Page 96

- 96 - BIOS Setup
Parameter
Description
Hot Plug Handling mode
Controls the Hot Plug Handling mode.
Options available: Auto, A0 Mode, OS First (No Error Handling),
OS First (Error Handling-Not Implemented), Firmware First (Not Implemented).
Default setting is Auto.
Presence Detect Select
mode
Controls the Presence Detect Select mode.
Options available: Auto, OR, AND. Default setting is Auto.
Preferred IO
Preferred IO select type.
Manual: Bus Number manually.
Auto: Default.
Options available: Auto, Manual. Default setting is Auto.
Loopback Mode
Enable/Disable the PCIe loopback mode.
Options available: Auto, Enabled, Disabled. Default setting is Auto.
CV test
Enable/Disable the running PCIECV tool support.
Options available: Auto, Enabled, Disabled. Default setting is Auto.