- 13 - Hardware Installation
Expansion Slot
Riser Card CRS101E:
1 x PCIe x16 slot (Gen4 x16), Full height half-length
Riser Card CRS101E:
1 x PCIe x16 slot (Gen4 x8 or x16), shared with OCP 2.0, Full height half-length
( Please see NOTE below)
Internal Riser Card CRS101H:
1 x PCIe x16 slot (Gen4 x16), Full height half-length
1 x OCP 3.0 mezzanine slot with PCIe Gen4 x16 bandwidth
1 x OCP 2.0 mezzanine slot with PCIe Gen3 x0 or x8 bandwidth, shared with
CRS101E ( Please see NOTE below)
NOTE:
1. GIGABYTE offers an optional riser card to support full bandwidth PCIe Gen4
x16 and OCP 2.0 Gen3 x8
2. Contact GIGABYTE sales rep or technical support for more details about
supporting full bandwidth
Storage
4 x 3.5/ 2.5" SATA/ SAS hot-swappable SSD bays
1 x M.2 slot:
- M-key
- PCIe Gen4 x4
- Supports NGFF-2280/22110 cards
NOTE:
SAS card is required for SAS devices support
Internal I/O
1 x M.2 slot
1 x USB 3.0 header
1 x COM header
1 x TPM header
1 x OCP 3.0 mezzanine slot
1 x OCP 2.0 mezzanine slot
1 x Front panel header
1 x HDD back plane board header
1 x PMBus connector
1 x IPMB connector
1 x Clear CMOS jumper
1 x BIOS recovery jumper
To Next Page
Loading...
