Gigabyte R181-340 - Installing the Optical Disc Drive

- 33 - System Hardware Installation
3-8 Installing the Optical Disc Drive
Follow these instructions to install an optical disc drive:
1. Loosenandremovethethumbscrewsecuringtheopticaldiscdrivedummytraytothesystem.
2. Remove the screw securing the optical disc drive bracket to the system.
3. Slide the optical disc drive dummy tray out of the system and remove the optical disc drive bracket
from the system.
4. Secure the optical disc drive bracket to the optical disc drive with two screws.
5. Slide optical disc drive into the system and secure the optical disc drive to the system with one
screw.
3
1
2
4
5