Gigabyte R262-ZA1 - Page 108

BIOS Setup - 108 -
5-3-3-1-4 Common RAS
Parameter Description
Common RAS
Data Poisoning
Enable/Disable the Data Poisoning function.
Options available: Auto, Enabled, Disabled. Default setting is Auto.
DRAM Post Package Repair
Enable/Disable the DRAM Post Package Repair function.
Options available: Enable, Disable. Default setting is Disable.
RCD Parity
Enable/Disable the RCD Parity function.
Options available: Auto, Enabled, Disabled. Default setting is Auto.
DRAM Address Command Parity
Retry
Enable/Disable the DRAM Address Command Parity Retry function.
Options available: Auto, Enabled, Disabled. Default setting is Auto.
Max Parity Error Replay
Congures the Max Parity Error Replay. (0~0x3
f)
Default setting is 8.
Please note that this item is congurable when DRAM Address
Command Parity Retry is set to Enabled.
Write CRC Enable
Enable/Disable the Write CRC function.
Options available: Auto, Enabled, Disabled. Default setting is Auto.
DRAM Write CRC Enable and Retry
Limit
Enable/Disable DRAM Write CRC Enable and Retry Limit.
Options available: Auto, Enabled, Disabled. Default setting is Auto.
Max Write CRC Error Replay
Congures the Max Write CRC Error Replay. (0~0x3
f)
Default setting is 8.
Please note that this item is congurable when DRAM Write CRC
Enable and Retry Limit is set to Enabled.