Gigabyte R262-ZA1 User Manual

System Appearance - 26 -
2-6 Hard Disk Drive LEDs
/('
/('
Disk LED
(LED on
Back Panel)
Removed HDD Slot
(LED on Back Panel)
Disk LED
Removed HDD Slot
RAID SKU
No RAID configuration
(via PCH, HBA)
RAID configuration
(via HW RAID Card or
SW RAID Card)
HDD
Access
HDD Present
(No Access)
BLINK (*2)
BLINK (*2)
OFF
OFF
OFF
OFF
OFF
--
--
--
--
--
--
--
--
OFF
(Low Speed: 2 Hz)
(*3)
(*3)
Rebuilding
HDD Fault
OFF
OFF
ON
OFF
ON
OFF
OFF
OFF
Locate
Amber
Green ON(*1)
ON
OFF
ON(*1)
OFF
Green
Amber
Green
ON(*1)Green
OFFAmber
Amber OFF
LED1
LED 2
HDD Present No HDD
Green
ON
OFF
NOTE:
*1: Depends on HBA/Utility Spec.
*2: Blink cycle depends on HDD's activity signal.
*3: If HDD is pulled out during rebuilding, the disk status of this HDD is regarded as faulty.

Gigabyte R262-ZA1 Specifications

General

Model	R262-ZA1
Form Factor	2U Rackmount
Processor Support	Dual AMD EPYC™ 7003 Series Processors
Chipset	AMD EPYC
Memory Slots	32 x DIMM slots
Memory Type	DDR4
Storage Bays	12 x 3.5" hot-swap HDD/SSD bays
M.2	2 x M.2 slots (PCIe Gen4 x4)
SATA	12 x SATA 6Gb/s ports
SAS	Optional
Networking	2 x 1GbE LAN ports (Intel I350-AM2)
Video	Aspeed AST2500
Front Panel	Power button
Rear Panel	2 x USB 3.0, 1 x VGA, 2 x RJ-45, 1 x serial port
Operating System Support	Windows Server, Linux distributions (RHEL, SLES, Ubuntu)