Hardware Installation - 12 -
1-2 Product Specications
System
Dimension
2U
438mm (W) x 87.5mm (H) x 730mm (D)
CPU AMD EPYC™ 7003 series processor family
Single processor, 7nm technology
Up to 64-core, 128 threads per processor
Fully support 280W
Compatible with AMD EPYC™ 7002 series processor family
Chipset
System on Chip
Hardware-
Level Root of
Trust Support
Supported
NOTE! The system will take extra time to boot as it goes through RoT
authentication.
Memory 16 x DIMM slots
DDR4 memory supported only
8-Channel memory architecture
RDIMM modules up to 128GB supported
LRDIMM modules up to 128GB supported
3DS RDIMM/LRDIMM modules up to 256GB supported
Memory speed: Up to 3200*/ 2933 MHz
- Note:
* Follow BIOS setting and memory QVL list if running 3200 Mhz with 2DPC
LAN 2 x 1GbE LAN ports (1 x Intel® I350-AM2)
1 x 10/100/1000 management LAN
Video
Integrated in Aspeed® AST2500
2D Video Graphic Adapter with PCIe bus interface
1920x1200@60Hz 32bpp
Storage Front Side: 12 x 3.5" hot-swappable HDD/SSD bays
» R262-ZA1
- *12 x blue HDD/SSD trays compatible with SATA/SAS devices
» R262-ZA2
- 4 x green HDD/SSD trays compatible with SATA/SAS/NVMe devices
- 8 x blue HDD/SSD trays compatible with SATA/SAS devices, enabled by
optional SAS Card
Rear Side: 2 x 2.5" SATA/SAS hot-swappable HDD/SSD bays
SAS card is required to enable the drive bays
NOTE:
We reserve the right to make any changes to the product specications and product-related
information without prior notice.
To Next Page
Loading...
Need help?
General