Gigabyte R262-ZA1 - Page 13

- 13 - Hardware Installation
Storage
(continued)
 Default Conguration supports:
- 4 x 3.5" SATA/SAS drives in front side
- 2 x 2.5" SATA/SAS drives in rear side
 Recommended 12Gb/s SAS cards:
- CRA4448
- CRA3338
* NOTE: 8 x blue HDD/SSD trays are enabled by optional SAS Card
SAS  Depends on SAS add-on card
RAID  Depends on SAS add-on card
Expansion Slot  Riser Card CRS2027:
- 1 x PCIe x8 slot (Gen4 x8), Low prole half-length
- 1 x PCIe x8 slot (Gen4 x8), Low prole half-length
 Riser Card CRS2225:
- 1 x PCIe x16 slot (Gen4 x16 or x8), Full height half-length
- 1 x PCIe x8 slot (Gen4 x0 or x8), Full height half-length
- 1 x PCIe x16 slot (Gen4 x16), Full height half-length
 Riser Card CRS2225:
- 1 x PCIe x16 slot (Gen4 x16 or x8), Full height half-length
- 1 x PCIe x8 slot (Gen4 x0 or x8), Full height half-length
- 1 x PCIe x16 slot (Gen3 x16 or x8, shared with OCP2.0 mezzanine slot),
Full height half-length
 Internal Riser Card CRS101H:
» R262-ZA1
- 1 x PCIe x16 slot (Gen4 x16), Full height half-length
» R262-ZA2
- 1 x PCIe x16 slot (Gen4 x16), Full height half-length, occupied by
CNV3134, 4 x NVMe Card
 1 x OCP 3.0 mezzanine slot with PCIe Gen4 x16 bandwidth
 1 x OCP 2.0 mezzanine slot with PCIe Gen3 x0 or x8 bandwidth, shared
with CRS2225
 1 x M.2 slot:
- M-key
- PCIe Gen4 x4
- Supports NGFF-2280/22110 cards