Gigabyte R262-ZA1 - Page 117

- 117 - BIOS Setup
Parameter
Description
Target Static Lane Select
Upper 32 bits
This item is congurable when Target Static Lane Control is set to
Enabled.
Target Static Lane Select
Lower 32 bits
This item is congurable when Target Static Lane Control is set to
Enabled.
Target Static Lane Select
ECC
This item is congurable when Target Static Lane Control is set to
Enabled.
Target Static Lane Value
This item is congurable when Target Static Lane Control is set to
Enabled.
Worst Case Margin
Granularity
Congures Worst Case Margin Granularity.
Options available: Per Chip Select, Per Nibble.
Default setting is Per Chip Select.
Read Voltage Sweep Step
Size
Congures the step size for read Data Eye voltage sweep.
Options available: 1, 2, 4. Default setting is 1.
Read Timing Sweep Step
Size
Congures the step size for read Data Eye timing sweep.
Options available: 1, 2, 4. Default setting is 1.
Write Voltage Sweep Step
Size
Congures the step size for write Data Eye voltage sweep.
Options available: 1, 2, 4. Default setting is 1.
Write Timing Sweep Step
Size
Congures the step size for write Data Eye timing sweep.
Options available: 1, 2, 4. Default setting is 1.