Gigabyte R262-ZA1 - Page 121

- 121 - BIOS Setup
Parameter
Description
DF Cstates
Enable/Disable DF C-states.
Options available: Auto, Enabled, Disabled. Default setting is Auto.
CPPC
Enable/Disable the CPPC feature.
Options available: Auto, Enabled, Disabled. Default setting is Auto.
HSMP Support
Enable/Disable the HSMP support.
Options available: Auto, Enabled, Disabled. Default setting is Auto.
DLWM Support
Enable/Disable the DLWM support.
Options available: Auto, Enabled, Disabled. Default setting is Auto.
BoostFmaxEn Options available: Auto, Enabled. Default setting is Auto.
EDC Current Tracking Options available: Enable, Disable. Default setting is Disable.
LCLK Frequency Control Press [Enter] for advanced conguration.
DF PSTATE Mode Select
Selects the DF PState Mode.
Option available: Normal, limit Highest, Limit All, Auto. Default setting is Auto.
EDC Control Options available: Auto, Manual. Default setting is Auto.