Gigabyte S451-3R1 - UPI Configuration

BIOS Setup - 76 -
5-3-3 UPI Conguration
Parameter
Description
UPI Conguration
UPI General Conguration
Press [Enter] to congure advanced items.

UPI Status
– Press [Enter] to view the UPI status.

Link Frequency Select
– Selects the UPI link frequency.
– Options available: 9.6GB/10.4GB/Auto. Default setting is Auto.

SNC
– Enable/Disable SNC.
– Options available: Disable/Enable/Auto. Default setting is Disable.

Stale AtoS
– Enable/Disable Stale A to S Dir optimization.
– Options available: Disable/Enable/Auto. Default setting is Disable.

LLC dead line alloc
– Enable/Disable LLC dead line alloc.
– Options available: Disable/Enable/Auto. Default setting is Auto.