• Auto Volume Control
Activate to prevent the volume from changing when you switch monitor
channels.
• Digital Audio Out
Select the digital audio output format that best suits the audio device type.
Note:
• When using optical connection, PCM and Dolby Audio-Dolby Digital are
suggested.
• If your external audio device does not support Dolby or DTS, PCM is
suggested.
• Digital Audio Delay
Adjust the digital audio output delay time to sync sound from an external
speaker with the images on the monitor.
Note:
• Digital Audio Out and Digital Audio Delay functions are only applicable
when Audio Output is set to ARC or when external audio players are
connected via DIGITAL AUDIO OUT jack.
• Lip Sync
Synchronize the displayed image with the audio output.
• Equalizer
Boost the volume at different frequencies.
• Preferred Audio Language
Set the default audio output language for the type of digital broadcast
content that you’re viewing.
• Headphone Mode
Change the way audio is sent through the type of device that’s connected
to your monitor Audio Out port.
Note:
• This function may not be applicable in some models/countries/regions.
• Headphone Volume
Independently adjust the volume of audio out devices.
Note:
• This function may not be applicable in some models/countries/regions.
Resetting the sound settings
Press button to select icon, and select Sound > Reset.
Reset current audio settings to factory mode.
23
To Next Page
Loading...
