Gigaset Maxwell Basic - Control Key Navigation

Click Set button.
■
Click on Provisioning and Configuration in the left navigation menu.
■
In the Provisioning Server field enter the following:
■
Hostname or IP Address, followed then by /prov.
Example for Hostname using HTTP: abc.bicomsystems.com/prov
Example for IP Address using HTTP: 192.168.1.10/prov
Click Set button.
■
Click on Start Auto Configuration button.
■
You'll have to wait couple of seconds for the configuration to be updated. NOTE: Do not power
■
off your phone.
Auto provisioning process will start during phone reboot process, phone will pickup
■
appropriate configuration file from PBXware. If everything is done as above described, you
should have successfully registered your phone to PBXware. Dial *123 to verify registration.
Retrieved from "http://wiki.bicomsystems.com/Gigaset_Maxwell_Basic"
Disclaimers - About Bicom Systems Wiki