37
Gigaset S820-S820A / LUG - UK + IE / A31008-M2404-L101-1-7619 / Register-HS.fm / 11/26/12
Template CES 131x195 1col, Version 1, 12.03.2012
Multiple handsets
Multiple handsets
Registering handsets
You can register up to six handsets to your base. You must initiate registration of the handset on
both the base and on the handset. Both must occur within 60 seconds.
¤ On the base: Press and hold (at least 3 seconds) the registration/paging key.
¤ On the S820H handset (for other handsets see "Notes"):
¤ Touch Register
or
Menu key v
¤Settings menu page ¤É HS + Base ¤Register
This creates a connection to the base, but it may take some time.
¤If necessary, enter the system PIN (default: 0000) ¤Confirm the PIN withè.
Successful registration is shown on the display
. Adjust the handset's setting using the Settings
menu item (
¢ page 60).
Using the handset on multiple bases
Your handset can be registered on up to four bases.
The active base is the last one your handset was registered with. The other bases are stored in
the
list of available bases.
You can change the allocation to a base m
anually at any time. Alternatively, you can set the
handset so that it selects the base with the best reception (Best Base) as soon as the connection
to the current base is lost.
Menu key v
¤Settings menu page ¤É HS + Base ¤Connect to Base
¤Touch the selection icon for the desired base or touch Best Base (
´
=selected)
Changing a base name or deleting a base
Menu key v ¤Settings menu page ¤É HS + Base ¤Connect to Base
¤Touch the name field for the desired base
¤Touch the name field and change the name
Or
¤Delete Base
Please note
u If six handsets are already registered with the base (all internal numbers occupied) then
the handset assigned internal number 6 is replaced by the new handset. If this attempt
is not successful, e.g. because this handset is being used to make or receive a call, the
message No free internal number is displayed.
In this case, de-register another handset that is no longer required and repeat the regis-
tration procedure.
u You should start the registr
ation procedure for other Gigaset handsets and handsets of
other GAP-enabled devices in accordance with the respective operating instructions.
To Next Page
Loading...
General
Weight and Dimensions
