GigaTent POP UP POD - User Manual

POP UP POD
Owner’s Manual
Model # ST006
36" x 36" x 69” (H)
ASSEMBLY INSTRUCTIONS DISASSEMBLY INSTRUCTIONS
IMPORTANT
We strongly suggest setting up your new
tent before going camping to insure that
all parts are present and to familiarize
yourself with the tents assembly. This
will have a great effect on how well you
enjoy your camping trip.
THE NEXT LEVEL IN CAMPING
TM
STEP 1:
Confirm product contents by emptying contents of bag(s)
and confirming all parts are included and undamaged.
STEP 2:
Select a smooth level site prior to opening the structure.
STEP 3:
Pull frame apart to pop open structure.
CAUTION: Structure has inner steel wire which may spring open
suddenly while attempting to open.
TIP: Frame may need minor adjustment when tent is set up. Gently bend
frame into shape if sagging appears.
STEP 4:
Stake down structure on bottom four corners.
It is strongly recommended to attach supplied guylines at the corners
near the top of structure and stake down to the ground.
STEP 1:
Pick up the structure and lay it on its side.
STEP 2:
Grasp the top of frame and push one of the corners INTO the structure
towards the OPPOSITE corner.
STEP 3:
The structure will now fold flat.
STEP 4:
Grasp 2 DIAGONALLY OPPOSITE corners and bring them together in
one hand. (You now have a loop above and below your hand)
STEP 5:
Kneel down and place the bottom loop on the ground.
STEP 6:
Grasp the outer edge of the top loop furthest away from you and fold
inward toward the lower loop and lay flat on the ground. (You now
have 2 loops on top of a larger one)
STEP 7:
Slide one of the smaller loops over the one next to it and grasp the
outside edges of the entire folded playhouse.
STEP 8:
Slowly move your hands around the outside edges to make all of the
loops the same size.
STEP 9:
Place folded structure into carry case.

Summary

Important Setup Advice

Assembly Instructions

Confirm Product Contents

Verify all parts are included and undamaged before beginning assembly.

Site Selection

Choose a smooth, level site for optimal tent setup and stability.

Opening the Tent

Gently pull the frame apart to open the structure, minding the spring mechanism.

Securing the Tent

Stake down the bottom corners and attach guylines for enhanced stability.

Disassembly Instructions

Initial Folding Steps

Lay the structure on its side and push corners inward to begin folding flat.

Folding Techniques

Manipulate the frame by grasping diagonal corners and folding loops to reduce size.

Final Storage

Adjust folded loops to uniform size and place the structure into the carry case.

Manufacturers Warranty

Product Warnings and Precautions

Overview

1. Function Description
2. Usage Features
3. Assembly
4. Disassembly
5. Maintenance Features
6. Warranty
7. Warnings and Care Instructions
8. General Recommendations

The Gigatent Pop Up Pod (Model # ST006) is a portable, pop-up structure designed for various outdoor uses, offering a quick and convenient setup. Its primary function is to provide a private, enclosed space that can be easily transported and deployed. The pod is lightweight and compact when folded, making it suitable for camping, outdoor events, or any situation where a temporary private area is needed.

Function Description:

The Pop Up Pod serves as a personal shelter, offering privacy and a degree of protection from the elements. Its pop-up design means it can be erected in a matter of seconds, making it ideal for quick changes, showering, or as a portable toilet enclosure in outdoor settings. The structure is designed to be stable once set up, with provisions for staking it down to the ground to enhance stability, especially in windy conditions. The pod's enclosed nature ensures discretion, which is particularly valuable in public or semi-public outdoor environments.

Usage Features:

The Pop Up Pod is characterized by its ease of use, from initial setup to packing away.

Assembly:

1. Content Confirmation: Before assembly, users are instructed to empty the contents of the carry bag and verify that all parts are present and undamaged. This crucial first step ensures a smooth setup process and identifies any potential issues before deployment.
2. Site Selection: A smooth, level site is recommended for optimal stability and performance of the structure. This helps prevent the pod from leaning or becoming unstable on uneven ground.
3. Pop-Open Mechanism: The core feature of the Pop Up Pod is its pop-open frame. Users simply pull the frame apart, and the structure springs open. A caution is provided regarding the inner steel wire, which can spring open suddenly, emphasizing the need for careful handling during this step.
4. Frame Adjustment (Optional): The manual notes that the frame may require minor adjustment after setup. If sagging appears, users can gently bend the frame into shape to achieve the desired tautness and form.
5. Staking Down: For enhanced stability, especially in outdoor conditions, the pod should be staked down at its four bottom corners. Additionally, it is strongly recommended to attach supplied guylines at the corners near the top of the structure and stake them down to the ground. This provides additional resistance against wind and ensures the pod remains upright and secure.

Disassembly:

The disassembly process is designed to be equally straightforward, allowing users to quickly pack the pod into its compact carry case.

1. Positioning: The first step is to pick up the structure and lay it on its side, preparing it for the folding sequence.
2. Initial Fold: Users grasp the top of the frame and push one of the corners into the structure, directing it towards the opposite corner. This action initiates the collapse of the frame.
3. Flattening: Following the initial fold, the structure will naturally fold flat, making it easier to manage for the subsequent steps.
4. Loop Formation: The next step involves grasping two diagonally opposite corners and bringing them together in one hand. This action creates two distinct loops: one above and one below the user's hand.
5. Grounding the Bottom Loop: Users then kneel down and place the bottom loop on the ground, stabilizing the structure for further folding.
6. Folding the Top Loop: The outer edge of the top loop, furthest away from the user, is then grasped and folded inward toward the lower loop, laying flat on the ground. At this point, the structure will have two loops on top of a larger one.
7. Consolidating Loops: One of the smaller loops is slid over the one next to it, and the outside edges of the entire folded playhouse are grasped. This step begins to consolidate the structure into a more compact form.
8. Equalizing Loops: Users slowly move their hands around the outside edges to ensure all the loops are of the same size. This creates a neat, circular, and compact package.
9. Storage: Finally, the folded structure is placed into its carry case, ready for transport or storage.

Maintenance Features:

The manual provides important information regarding the care and longevity of the Pop Up Pod, primarily through its "Manufacturer's Warranty" and "WARNING" sections.

Warranty:

• Coverage: The warranty covers defects in material and workmanship for 14 days from the date of purchase. This indicates that users should inspect the product thoroughly upon receipt and report any issues promptly.
• Exclusions: The warranty explicitly does not cover natural breakdown of materials due to extended use, such as UV damage, exhausted zippers, or defects caused by accident, abuse, alteration, animal attack, storm damage, misuse, or improper care. This highlights the importance of proper handling and storage to prolong the product's life.

Warnings and Care Instructions:

• UV Exposure: A critical warning states that the product was not designed to be left out in direct sunlight for extended periods. Prolonged UV exposure will rapidly break down the color and integrity of the product, and UV damage is not covered under warranty. This emphasizes the need to store the pod out of direct sunlight when not in use or to limit its exposure during deployment.
• Fire Safety: The manual includes several stern warnings regarding fire:
  • "NEVER LEAVE BURNING FIRE UNATTENDED."
  • "Wind may topple product. Use extra caution."
  • "Keep all Flame and Heat away from product."
  • "THIS PRODUCT IS NOT FIRE PROOF."
  • "IF LEFT TOO CLOSE OR ON OPEN FLAME THE PRODUCT WILL BURN OR BE SEVERELY DAMAGED."
  • "CAUTION: Use caution when using propane stove on this product. Unintended fire my result in damage of product or bodily harm." These warnings underscore that the pod is made of flammable materials and should be kept far away from any heat sources, open flames, or cooking equipment to prevent severe damage or injury.

General Recommendations:

• Pre-Camping Setup: Users are strongly advised to set up the tent before going camping. This allows them to confirm all parts are present, familiarize themselves with the assembly process, and make any necessary adjustments. This practice is stated to have a "great effect on how well you enjoy your camping trip," by preventing frustration and ensuring a smooth experience in the field.

In summary, the Gigatent Pop Up Pod is a user-friendly, portable privacy shelter designed for quick deployment and compact storage. Its features prioritize convenience and ease of use, while the maintenance guidelines focus on safe operation and extending the product's lifespan through careful handling and adherence to environmental warnings.

GigaTent POP UP POD Specifications

General

Brand	GigaTent
Model	POP UP POD
Capacity	1 person
Material	Polyester
Water Resistance	Water-resistant
Setup Time	Instant setup
Type	Privacy Tent
Weight	3 lbs
Special Features	Portable, lightweight