Owner’s Manual
MODEL # CT050/ Princess Cruiser
Dimensions: 6’ x 36” x 36”
DESCRIPTION QTY.
CAR TENT
100% Polyester 1
POLES
Fiberglass Pole; Black 2
STAKES
Metal 4
CARRY POUCH
100% Polyester 1
ASSEMBLY INSTRUCTIONS
3B
3C
3A
3D
STEP 1:
Confirm product contents by emptying contents of bag(s)
and confirming all parts are included and undamaged.
STEP 2:
Select a smooth level site and spread out your tent.
STEP 3:
Extend poles and place in position ready for installation.
Insert a pole into the corner pocket (figure 3A).
Attach corresponding clips to pole (figure 3B).
Repeat process for the remaining pole.
NOTE: Poles will cross each other at the center.
STEP 4:
After attaching poles to clips, gently flex one of
the poles into an arc and insert opposite pole end into
diagonally opposite pocket. Repeat process for remaining pole.
STEP 5:
Tie the top of the tent with the ties (figure 3C)
STEP 6:
If outdoors, stake the tent down (figure 3D).
To Next Page
Need help?
General
