Need help?Do you have a question about the Gilson Microman M10 and is the answer not in the manual?
Lists Microman models, volume ranges, and autoclaving capabilities for selection.
Details materials used in Microman pipette construction for each model.
Instructions for drawing liquid into the pipette using the correct technique.
Instructions for delivering liquid from the pipette accurately.
Procedure for safely ejecting used capillary-pistons simultaneously.
Guidance on identifying and fixing leaks in the pipette.
Troubleshooting steps for when the pipette fails to draw liquid.
Solutions for challenges encountered when fitting a capillary.
Steps to correct inaccurate volume measurements for precise results.
Methods to improve the pipette's precision and consistency.
Step-by-step guide for cleaning the exterior surfaces of the pipette.
Instructions for cleaning internal components that contact liquids.
General| Type | Positive displacement pipette |
|---|---|
| Increment | 0.1 µL |
| Calibration | Factory calibrated |
| Tip Type | Capillary pistons |
| Sterilization | Autoclavable |
| Volume Range | 1 to 10 µL |
To Next Page