To Next PageTo Next Page
Need help?Do you have a question about the Gilson GX-271 and is the answer not in the manual?
Explains the meaning of warning, caution, and notice symbols used in the document.
Covers lifting, voltage, probe handling, solvent safety, and replacement parts usage.
Provides an overview of the topics covered in the Introduction chapter.
Provides a general overview of the GX-271 Liquid Handler and its optional components.
Lists the components and accessories included with the GX-271 Liquid Handler.
Lists optional accessories available for the liquid handler.
Information on how to contact Gilson for assistance, including sales and support.
Details general specifications and compliance for the GX-271 Liquid Handler.
Lists technical specifications for the optional GX Solvent System.
Lists technical specifications for the optional 402 Syringe Pump.
Lists technical specifications for the optional GX Direct Injection Module.
Lists technical specifications for the optional GX Rinse Pump and Fraction Collection Valve.
Introduces steps for setting up the locator plate and its accessories.
Instructions for installing the optional GX Direct Injection Module.
Step-by-step guide to installing the locator pan and rinse stations.
Instructions for installing the tray insert onto the locator pan.
Instructions for installing the GX Solvent System and GX Rinse Pump.
Overview of components and order for Z-arm assembly and installation.
Instructions for installing the guide foot and fraction collection valve.
Procedure to adjust Z-arm height and install cable management.
Procedure for inserting the probe and connecting the LLD cable.
Detailed steps for installing a syringe into the 402 Syringe Pump.
Introduction to making rear panel connections for various components.
Steps to establish Ethernet, RS-232, and GSIOC connections.
Instructions for connecting GX Solvent, 402 Pump, Rinse Pump, and DIM.
Details the function and usage of the liquid handler's input/output ports.
Instructions for connecting Z-arm, fuses, and power cord.
Visual diagrams illustrating rear panel connections for different communication types.
General introduction to installing various types of racks.
Overview of plumbing connection procedures for various optional components.
Detailed steps for plumbing GX Solvent, 402 Pump, Rinse Pump, DIM, and Valve.
Describes the components of the liquid handler's front panel, including displays and indicators.
Instructions for powering on and starting the liquid handler.
Information about the GX-27X Series Offset Utility software and its components.
Explains the sequences for aspirating and dispensing fluids.
Provides recommendations for keeping the liquid handler at peak performance.
General cleaning procedures for the liquid handler and its syringe.
Steps for removing, disassembling, cleaning, and reinstalling the 402 Syringe Pump valve.
Procedures for replacing tubing and probes.
Procedures for removing and installing a new syringe and replacing piston seals.
Instructions for safely replacing a blown fuse in the instrument.
Guidelines for safely moving or shipping the liquid handler.
Lists and explains error codes and their solutions.
Addresses common mechanical and electrical problems and their solutions.
Steps to ensure proper Ethernet connectivity and verify communication.
Information on obtaining service, including required details and warranty.
Lists part numbers for the GX-271 Liquid Handler itself.
Lists part numbers for various probes and their accessories.
Lists part numbers for rinse stations, rack accessories, and miscellaneous items.
Lists part numbers for optional systems like GX Solvent, 402 Pump, etc.
Lists sample loops and accessories for the GX Direct Injection Module.
Describes material properties like Nitronic 60, Stainless Steel, PAEK, PEEK, and Valcon H.
General| Type | Liquid Handler |
|---|---|
| Number of Channels | 1 |
| Power Supply | 100-240 VAC, 50/60 Hz |
| Operating Temperature | 4°C to 40°C |
| Communication | RS-232 |
| Pump Head | Preparative |
| Speed Control | Digital |
| Sample Capacity | Up to 120 samples (depending on rack configuration) |
| Vial Size | 2 mL, 4 mL, 10 mL |
| Collection Vessel Types | Vials, Tubes, Microplates |
| Pump Type | Peristaltic |
