Gilson GX-271 Liquid Handler User’s Guide Safety-1
Safety
Read this section before installing and operating the liquid handler.
The liquid handler is intended to be used in a laboratory environment by trained technical personnel.
For safe and correct use of this instrument, it is recommended that both operating and service personnel follow the instructions
contained in this guide when installing, cleaning, and maintaining the liquid handler.
The following safety precautions must be observed during all phases of operation, service, and repair of the instrument. Failure
to comply with these precautions or with specific warnings elsewhere in this user’s guide violates safety standards of design,
manufacture, and intended use of the liquid handler. Gilson assumes no liability for the customer’s failure to comply with these
requirements.
The instrument has been certified to safety standards required in Canada, Europe, and the United States. Refer to the rear panel
label on the instrument or the Declaration of Conformity document for the current standards to which the instrument has been
found compliant.
To Next Page
Loading...
