25
SPECIFICATIONS
About the Accuracy of This Product
• This product passes strict inspection before delivery and therefore its accuracy is guaranteed by the
manufacturer.
Please refer to the above table for the descriptions on accuracy.
• This product is specially designed for body fat analysis as well as weight measurement. It should NOT
be used by anyone during the process of transaction for verication of goods’ weight.
MAINTENANCE
When carrying out usual maintenance, please ensure practice of the following Do’s and Don’ts:
• DO use a dry soft cloth to wipe the dust.
• DO use a wet soft cloth, dipped into water and wrung out, to wipe the dirt. Then use a dry soft cloth to
dry up the device.
• DON’T wash the device with water or immerse it in water.
• DON’T use propellant, abrasive or other chemicals to wipe the dirt in avoidance of discolor or malfunc-
tion.
• DON’T disassemble this device. If you have any problems, please contact Gima. (Please refer to War-
ranty for contact information).
Product Name Glass Body Fat Analyzer
Dimension Scale: 310x310x18.8mm (Approx.)
Net Weight Approximately 1.9 kg (Excluding the cells)
Display Digital LCD
Measurement Unit Kilogram / Pound / Stone
Measurement Range 5 kg to 150 kg/ 0 st : 11 lb to 23 st : 8 lb/ 11 lb to 330.7 lb
Division 0,1 kg / 0,2 lb / 0,2 lb
Accuracy 50 ±0,3 kg;
100 ±0,4 kg;
150 ±0,5 kg;
Working Environment Temperature: 5℃ to 40℃
Relative Humidity: ≤90% RH
Atmospheric pressure: 86kPa to 106kPa
Storage Environment Temperature: -20℃ to 60℃
Relative Humidity: ≤90% RH
Atmospheric pressure: 50kPa to 106kPa
Power Source 6V (2xCR2032 Batteries)
Turn on Method SENSE ON technology
Auto-OFF The scale will turn off after about 10s if there is no operation.
Accessories 1. 2xCR2032 Batteries
2. User Manual
Mode of Operation Continuous Operation
ENGLISH
To Next Page
Loading...
Need help?
General
