Gima OXY-5 - APPENDIX II EMC; Guidance and Manufacturers Declaration - Electromagnetic Emission

98
Guidance and manufacturer’s declaration-electromagnetic emission
The Fingertip Oximeter is intended for use in the electromagnetic environ-
ment specied below. The customer or the user of the Fingertip Oximeter
should assure that it is used in such an environment.
Emission test Compliance Electromagnetic
environment-guidance
RF emissions
CISPR 11
Group 1 The Fingertip Oximeter uses RF
energy only for its internal func-
tion. Therefore, its RF emissions
are very low and are not likely to
cause any interference in nearby
electronic equipment.
RF emissions
CISPR 11
Class B The Fingertip Oximeter suitable
for use in all establishments,
including domestic establishments
and those directly network that
supplies buildings used for
domestic purposes.
Harmonic emissions
IEC 61000-3-2
N/A
Voltage uctuations/
icker emission
IEC 61000-3-3
N/A
APPENDIX II EMC
The equipment meets the requirements of IEC 60601-1-2:2014.
Table 1