Why is the SpO2 and Pulse Rate display instable on my Gima OXY-PED?
If the SpO2 and Pulse Rate display on your Gima Medical Equipment is unstable, it could be due to a couple of reasons. First, ensure that your finger is placed far enough inside the device. If not, reposition your finger properly. Second, keep your finger still. Any shaking or movement from the patient can cause instability, so try to remain calm during measurement.
What to do if my Gima Medical Equipment can not turn on?
If your Gima Medical Equipment isn't turning on, here are a few things to check: 1. The coin cell might be drained or almost drained. If so, charge the coin cell. 2. The coin cell might not be inserted correctly. Try reinstalling the coin cell to ensure it is properly seated.
Why is the indicator light off suddenly on my Gima Medical Equipment?
The indicator light on your Gima Medical Equipment might turn off suddenly due to these reasons: * The device automatically powers off if it doesn't detect a signal for 8 seconds, which is normal. * The coin cell may be almost drained. In this case, charge the coin cell.
What to do if Gima Medical Equipment device can not turn on?
If the Gima Medical Equipment device won't turn on, it might be due to several reasons. First, the coin cell may be drained or almost drained, in which case, you should charge the coin cell. Second, the coin cell may not be inserted properly, so try reinstalling it. If the issue persists, the device may be malfunctioning, and you should contact the local service center.
Why is the SpO2 and Pulse Rate display instable on Gima Medical Equipment?
The unstable SpO2 and Pulse Rate display on your Gima Medical Equipment device may be due to a couple of reasons. - First, ensure that your finger is placed far enough inside the device; if not, reposition it correctly and try again. - Second, if your finger is shaking or the patient is moving, instruct the patient to remain calm.
Essential guidelines for safe use, including hazards, precautions, and disposal procedures.
Details the device's features, uses, and environmental operating conditions.
Provides detailed technical data on display, power, measurement parameters, and device dimensions.
Guides users through device setup, including battery installation and operational steps.
Instructions for charging the device's cell and performing routine maintenance.
Addresses common issues, possible reasons, and solutions for device malfunction.
Covers declaration of conformity, symbol explanations, disposal, and product warranty details.
General| Brand | Gima |
|---|---|
| Model | OXY-PED |
| Category | Medical Equipment |
| Language | English |
To Next Page
