To Next PageTo Next PageWhat to do if my Gima Medical Equipment won't turn on?
If your Gima Medical Equipment won't turn on, the batteries may be drained or not properly installed. Replace the batteries or reinstall them. If the issue persists, the device may be malfunctioning, and you should contact the local service center.
Why does the display turn off on my Gima OXY-4?
The Gima Medical Equipment display might turn off automatically if it doesn't receive a signal for 8 seconds, which is normal. Alternatively, the batteries may be running low, in which case you should replace them.
How to fix an unstable SpO2 and Pulse Rate display on Gima Medical Equipment?
If the SpO2 and Pulse Rate display on your Gima Medical Equipment is unstable: 1. Ensure your finger is placed far enough inside the device and try again. 2. Make sure the patient keeps calm and isn't moving or shaking.
General| Display | LCD |
|---|---|
| Product color | Blue |
| Pulse rate measurement range | 30 - 240 bpm |
| Oxygen saturation measurement range | 35 - 99 % |
| Battery type | AAA |
| Battery voltage | 1.5 V |
| Power source type | Battery |
| Number of batteries supported | 2 |
Weight and Dimensions| Depth | 36 mm |
|---|---|
| Width | 66 mm |
| Height | 33 mm |
Provides essential safety instructions for operating the oximeter.
Details important cautions for accurate readings and device handling.
Guides users on correct finger placement and initiating measurement.
Explains how to cycle through various display orientations.
Describes how to toggle between Pulse Rate and Perfusion Index views.
Details device alerts for out-of-range values and managing audible notifications.
Provides steps for safely cleaning and disinfecting the device.
