17
Instructions to User
Read these instructions carefully before using this equipment. These
instructions describe the operating procedures to be followed strictly.
Failure to follow these instructions can cause measuring abnormity,
equipment damage and personal injury. The manufacturer is NOT re-
sponsible for the safety, reliability and performance issues and any mon-
itoring abnormality, personal injury and equipment damage due to user’s
negligence of the operation instructions. The manufacturer’s warranty
service does not cover such faults.
Please peruse the relative content about the clinical restrictions and
caution.
1. SAFETY
1.1 Instructions for Safe Operations
- Check the main unit and all accessories periodically to make sure
that there is no visible damage that may affect patient’s safety and
monitoring performance. It is recommended that the device should be
inspected once a week at least. When there is obvious damage, stop
using the oximeter.
- Necessary maintenance must be performed by qualied service engi-
neers ONLY. Users are not permitted to maintain it by themselves.
- The oximeter cannot be used together with the devices not specied
in User’s Manual.
1.2 Warnings
- Explosive hazard—DO NOT use the oximeter in environment
with inammable gas such as some ignitable anesthetic agents.
-
DO NOT use the oximeter while the testee measured by MRI and CT.
- To dispose the device, the local law must be followed.
1.3 Attentions
- Keep the oximeter away from dust, vibration, corrosive sub-
stances, explosive materials, high temperature and moisture.
- If the oximeter gets wet, please stop operating it. When it is
carried from cold environment to warm and humid environment,
please do not use it immediately.
ENGLISH
To Next Page
Loading...
Need help?
General
