10
Connecting the main carabiner
The carabiner attachment points are colour coded to match your
GIN Glider. BLUE on the right and RED on the left to match your
GIN glider. To connect your carabiner to the attachment points be
sure to pass the carabiner through all 3 webbing loops on each
side. Each loop is sewn together to make assembly easier and
safer for the pilot.
It is important that the carabiner remains in the upright
position so the load is distributed lengthwise. Be sure to check
that your carabiner gates are securely closed before takeoff to
ensure they do not open or break during flight.
To Next Page
