7
Development & Philosophy
The Yeti Convertible 2 our latest lightweight reversible harness. It is a development from the orginal
highly successful Yeti Convertible. We took your feedback onboard throughout the development. As a
result we have managed to improve in all aspects.
The materials used for the rucksack have been upgraded a specially designed Air-Flow System has been
incorporated. This new system dramatically increases the comfort for the wear and rapidly wicks away
sweat.
The reversible rucksack has been redesigned to appropriately re-distribute the load of your flying gear
from the shoulders to the waist strap for a 30 / 70 weight distribution.
The new, optional, airbag has been designed with an integrated rescue compartment that can be used
with all GIN lightweight rescues. This feature will imporve the pilots experience as a front mounted resuce
can be cumbersome and many pilots prefer an under seat rescue. However some pilots do prefer the frount
mounted rescue, on the right side of the harness there is a bridle tunnel to allow front mounted rescues to
be connected to the shoulder attachment points. Or the pilot can connect the rescue bridles directly to the
carabiners.
The front air intake of the air bag improves inflation and the interal structure of the airbag helps to
reduce impact forces and maximise efficiency. The new titanium wire structure improves pre-inflation and
is resistant to bending or retaining improper shape, making packing easier and flying safer.
To Next Page
Loading...
