Interval: The Interval setting applies to Time Lapse Video, Video +
Photo and Looping.
Time Lapse Video: The intervals determines the amount of time that
passes between each captured frame.
Video + Photo: Simultaneously captures both video and photos. You
can set the camera to capture a photo at selected intervals while you
record. The intervals determines the time that passes between 2
photos captured during recording.
Looping: Lets you continuously record and save only the best
moments, which helps to conserve space on your microSD card. The
intervals determines the time length of each video segment. When the
microSD card is full, the previous video will be overwritten.
Video Resolution
4K
2160P
1440P
1080P
720P
FPS NTSC / PAL
30, 25
30, 25
60, 50, 30, 25
120, 100, 60,
50, 30, 25
240, 200
Screen Resolution
3840 x 2160, 16:9
2880 x 2160 4:3
1920 x 1440, 4:3
1920 x 1080, 16:9
1280 x 720, 16:9
Mode
Time Lapse
Vid+Photo
Looping
Available Interval
1s, 2s, 5s, 10s, 30s, 60s
5s, 10s, 30s, 60s
1 Min, 3Min, 5Min, Max
Rate (Only available in SLOMO): Slow-motion effects are created by
recording hundreds of frames per second and then playing the same
frames back at a slower rate.
Quality: Normal, Fine, Super Fine for different bitrate video
Stamp: Add a date stamp to your video.
Zoom: It zooms in on the center of the shot, good for capturing
content at a distance, change the zoom value according to the distance
between the camera and object.
Meter: The metering mode refers to the way in which the camera
determines the exposure. Various metering modes (Average, Spot, and
Center) are provided for a variety of lighting conditions.
WB (White Balance): White balance adjusts the overall color tone of
videos. The camera can automatically adjust the white balance, or you
can manually adjust the white balance.
Color: Color allows you to adjust the color profile of your video footage.
Sharpness: Sharpness controls the sharpness of your video footage.
You can use High option for an ultra-sharp look, the Medium option for
moderate sharpness, or the Low option for a softer look.
EV (Exposure value): Exposure value affects the level of brightness of
your video. Adjusting this setting can improve image quality when
shooting in environments with contrasting lighting conditions.
compression.
-7- - 8-
To Next Page
Loading...