Need help?Do you have a question about the GitUp GIT2 and is the answer not in the manual?
General| Sensor | Sony IMX206 |
|---|---|
| WiFi | Yes |
| Lens | 170° Wide Angle |
| Video Format | MP4 |
| Image Resolution | 16MP |
| Image Format | JPG |
| Storage | MicroSD |
| Battery | 1050mAh |
| Ports | Micro USB, HDMI |
| GPS | Optional (external module) |
| Chipset | Novatek NT96660 |
| Display | 2.0 inch LCD |
Learn how to turn the camera on/off, cycle modes, and adjust general settings.
Visual indicators for various video and photo recording settings and features.
Configure video resolution and manage recorded files via playlist mode.
Introduction to system-wide configurations like quick capture, beep, and OSD.
Configure looping intervals for continuous recording, overwriting oldest files.
Adjust audio input sensitivity and enable/disable date/time stamps on recordings.
Configure time-lapse, automatic snapshots, and adjust color balance.
Set custom white balance, assign menu button functions, and adjust exposure value.
Adjust camera sensitivity and color profile for video footage.
Enable stabilization, adjust dynamic range, and create slow-motion video.
Control sharpness, select metering, and adjust field of view for videos.
Configure motion detection, G-sensor, and select photo image size.
Adjust shutter speed, date stamps, and time-lapse intervals for photos.
Configure self-timer, exposure value, and ISO sensitivity for photos.
Adjust color profile, white balance, and custom white balance for photos.
Select capture mode, control sharpness, and set metering for photos.
Use RAW format, play, delete, and protect recorded files.
Enable slideshow and use the quick capture feature for instant recording.
Configure sound indicators and on-screen display information.
Configure car mode, custom text, and manage LED indicator status.
Manage screen sleep and automatic power off to conserve battery.
Set date/time, user interface language, and power frequency.
Configure TV output, pair remote, and format the SD card.
Reset to factory defaults and check firmware version.
To Next Page