GitUp Git2 User Manual dashcamscentral.com.au
Motion Detection
The camera will start to record when it detects motion if you enable the "motion detection"
feature, and it will stop recording after one minute if the camera doesn't detect motion.
Default Setting: Off
G-Sensor
This is a dashcam feature, its main purpose is to lock the current files while recording as soon as
it detects shake. You can set G-sensor sensitivity as from high to low. High means camera will
start recording at slightest shock, low does quite opposite.
Available options for G-Sensor are: Off/Low Sensitivity/Middle Sensitivity/High Sensitivity
Default Setting: Off
Photo Mode
Image Size
GitUp Git2 captures photos at 16MP/12MP/8MP/5MP/3MP
Default Setting:16MP
To Next Page
Loading...