An inconspicuous reliable 35m external passive infrared detector
that works in conjunction with the GJD security lighting controllers.
The Opal XL is encased in a robust high impact ABS housing. The
plug electronics module is supported by an internal bracket which is
fully adjustable horizontally and vertically. Further protection against
harsh environments is offered by a separate polythene lens cover
which conceals the angle of detection from any intruder and totally
hides the wiring.
-1-
Installation Manual
OPAL XL SPECIFICATIONS
Area 10 to 35m (adjustable) up to 750 sq m
Coverage 90º 35m x 30m max
Adjustment 180º pan + 90º tilt
Area reduction mask (if required)
Lens Fresnel: 36 zone - White light lter
No. 1 Output ‘A’ Open collector -ve switching - 25mA
max.
Alarm period 400ms
No. 2 Output ‘S’ Open collector -ve switching - 25mA
max
Alarm period : detection +60 seconds
Adjustable: Dusk (2 Lux) to 24 hour
Power Input 9 to 15VDC
Current 6mA (12V nominal)
Control Digital ASIC/microprocessor
Operating Temp -20º to +55º C
Protection Rating IP55 - High Impact ABS Housing
Dimension 104 x 104 x 94mm Weight 136 grams
Mounting Height - Variable - optimum height 3 metres
Cable up to 200m: standard 4 core 7/0.2mm
up to 500m: 8 core 16/0.2mm use double core
Opal XL
GJD 020 Opal XL 35m External PIR
To Next Page
Need help?
General
