GJD OPAL RFX WIRELESS 35 METRE EXTERNAL PIR
I
NSTALLATION MANUAL
- 1 -
A WIRELESS PASSIVE INFRARED DETECTOR AND THREE CHANNEL
RECEIVER
THAT SIMULTANEOUSLY OR INDIVIDUALLY CONTROLS
CCTV
SWITCHERS, VIDEO RECORDERS AND IF REQUIRED GJD
SECURITY LIGHTING CONTROLLERS.
THE RFX RECEIVER HAS THREE INDEPENDENT CHANNEL INPUTS AND OUTPUTS PLUS ONE
SEPARATE
PHOTOCELL CONTROLLED OUTPUT FOR INFRA RED OR SECURITY LIGHTING APPLICATIONS.
IN ESSENCE THE VERSATILITY OF THE TIMED OUTPUTS GIVES THE UNIT AN ENDLESS LIST OF
APPLICATIONS
FROM THE ACTIVATION OF ALARM TRACKING DOMES, SWITCHING TIME-LAPSE
VCR’S TO REAL TIME TO SPEECH ENUNCIATORS AND PAGERS.
OPAL RFX WIRELESS P.I.R
SPECIFICATION:
Supply:
2 x AAA Alkaline 1.5 volt
Low power typical battery life two years.
Coverage:
8 - 35 metres with 90º multifunction lens
internal adjustment 180º pan + 90º tilt.
Features:
433.92MHz frequency, SAW stabilised.
150 metres line-of-sight exterior.
Digital and optical white light filter.
Digital temperature compensation
Battery low & attendance signal
Secure wire code learning
Non Volatile Memory
Intelligent digital signal processing
'A' detection signal 24 hour
Light level signal (S) 2 lux to daylight
Pulse Count 1 to 3
Temperature: -20 C + 55 C
Enclosure: ABS high impact IP55 rated
RFX 3 CHANNEL RECEIVER
SPECIFICATION:
Supply:
12VDC @ 40mA nominal
(9 to 20VDC maximum)
Outputs (A):
3 x independent channel outputs (24hr)
Solid state volt free contacts switching
to common (common= negative)
Rated @ 250mA at 24VDC
Individual timed 0.4 to 60 seconds after
last detection. Non volatile memory.
Lux Output (S):
1 x photocell controlled switching
Active 60 seconds after last detection
Indication with outputs:
Independent channel active
Attendance reporting and jamming
Battery low warning output.
Temperature: -20 C + 55C
Enclosure: (mount vertical indoors)
To Next Page
Need help?
General
