GL-P103
ASSEMBLY & FITTING INSTRUCTIONS
Mains Powered Carbon Monoxide Alarm
Please read these instructions carefully before attempting to install this fitting.
It is advisable to keep these instructions in a safe place for future reference. If this fitting is
installed by a contractor, the contractor should ensure that the customer has a copy of these
instructions.
DESCRIPTION
The GL-P103 carbon monoxide (CO) alarm should be installed in every room with a fuel burning
appliance. CO cannot be seen, smelt or tasted but can be fatal. The alarm will warn inhabitance
of the home that the CO levels in the room are dangerous levels.
SPECIFICATION
Battery: 7-year CR123A built-in
lithium battery
Sensor: Electrochemical
LCD Display: 0ppm-499ppm (±10%)
Alarm Level: 50 ppm...... 60 -90 mins
100ppm.... 10-40 mins
300ppm.... <3 mins
Alarm Sound Output: >85dB at 3 metres
Expected Life Span: 7 years
Size: ø90.6 x 35.2 mm
Approvals: BS EN 50291-1:2018
KM 707132
BS EN 50291-1:2018
Ø90.6mm 35.2mm
To Next Page
Need help?
General