EasyManua.ls Logo

Glacier bay 1005877845 - User Manual

Glacier bay 1005877845
34 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
THANK YOU
INSTALLATION AND CARE GUIDE
DORIND SINGLE-HANDLE 1-SPRAY
TUB AND SHOWER FAUCET
We appreciate the trust and confidence you have placed in Glacier Bay through the purchase of this tub and
shower faucet. We strive to continually create quality products designed to enhance your home. Visit us online
to see our full line of products available for your home improvement needs. Thank you for choosing Glacier Bay!
Questions, problems, missing parts?
Before returning to the store, call Glacier Bay Customer Service
8 a.m. - 7 p.m., EST, Monday - Friday
9 a.m. - 6 p.m., EST, Saturday
1-855-HD-GLACIER (1-855-434-5224)
HOMEDEPOT.COM
HOMEDEPOT.COM
9/2020 REV.01
Model#
HD873X-5D01
HD873X-5D04
HD873X-5D10H
HD873X-5D4405
SKU#
1005877845
1005877848
1005877847
1005877850
Internet#
315055926
315055920
315055925
315055919

Table of Contents

Questions and Answers

  • A
    Angela KingAug 17, 2025
    What to do if there is leaking or dripping from the spout of my Glacier Bay Bathroom Fixtures when the handle is closed?
    • S
      Stephanie CookAug 17, 2025
      If you notice leaking or dripping from the spout when the handle is closed, it could be due to a few reasons. The cartridge might not be properly installed, so try reinstalling it. Also, check to ensure the sealed washer on the cartridge is in place; if it's missing, replace the cartridge. Another possibility is that the bonnet nut isn't tightened enough. Use a wrench to retighten the bonnet nut sufficiently.
  • Q
    qgarrettAug 20, 2025
    Why is there no flow or low water flow in my Glacier Bay Bathroom Fixtures?
    • E
      Emma DavisAug 20, 2025
      A lack of water flow or low water flow could be caused by several factors. Check if one or both water supplies are not turned on and ensure both water supply valves are in the 'on' position. Also, the stop valves might be turned off or not fully turned on; make sure to fully turn them on. Finally, the screen filter in the spray head could be blocked. To resolve this, turn off the water supply at the angle valve and unscrew the spray head from the spray hose, then clean the screen filter under running water.
  • L
    Lee SmithAug 23, 2025
    What to do if water comes out of the tub spout and showerhead at the same time in my Glacier Bay Bathroom Fixtures?
    • N
      Nina LucasAug 23, 2025
      If water is coming out of both the tub spout and showerhead simultaneously, it could be due to several reasons: * The pipe used between the valve and the tub spout is not 1/2 in. IPS, or the COPPER pipe is incorrect. Change the pipe to IPS or COPPER. * The distance between the valve and the showerhead is less than 48 in.. The distance from the showerhead and valve moved to at least 48 in.. * There is a restriction between the valve and the tub spout. Remove the tub spout, flush out any debris, and replace any undersized lines or fittings. * The valve is installed upside down. Remove the valve and reinstall it with the correct orientation.
  • R
    Robert ClarkeAug 26, 2025
    Why is the handle hard to turn on my Glacier Bay Bathroom Fixtures?
    • D
      deborahthompsonAug 26, 2025
      If the handle is hard to turn, the bonnet nut might be too tight. Try loosening the bonnet nut and reinstalling it, being careful not to overtighten it.
  • Z
    zachary50Aug 28, 2025
    Why is there no hot water from my Glacier bay 1005877845?
    • C
      Carolyn AndersonAug 28, 2025
      If you are not getting any hot water from your Glacier Bay Kitchen & Bath Fixtures, it could be due to a couple of reasons. Either the lines are reversed, or the cartridge is installed upside down, in which case you should rotate the cartridge 180°. Alternatively, the balance valve in the cartridge might be clogged with debris; try cleaning the bottom of the cartridge.
  • A
    Amy CooperAug 31, 2025
    What to do if there is low water flow from Glacier bay 1005877845?
    • G
      George MeltonAug 31, 2025
      If you're experiencing low or no water flow from your Glacier Bay Kitchen & Bath Fixtures, here are a few things to check: * Make sure both water supplies are fully turned on. * Ensure the stop valves are completely open. * Inspect the screen filter in the spray head for blockages; if blocked, turn off the water supply at the angle valve, unscrew the spray head from the spray hose, and clean the screen filter under running water.
  • A
    alan18Sep 3, 2025
    How to fix a leaking Glacier Bay Kitchen & Bath Fixtures spout?
    • A
      Amanda CollinsSep 3, 2025
      If your Glacier Bay Kitchen & Bath Fixtures spout is leaking or dripping when the handle is closed, several issues could be the cause. First, make sure that the cartridge is properly installed. If the issue persists, check that the sealed washer on the cartridge is in place; if it's missing or damaged, replace the cartridge. Lastly, ensure the bonnet nut is sufficiently tightened using a wrench.
  • S
    sparksjanetSep 5, 2025
    Why is the handle on my Glacier bay 1005877845 Kitchen & Bath Fixtures hard to turn?
    • K
      Kim BrooksSep 5, 2025
      If the handle on your Glacier Bay Kitchen & Bath Fixtures is hard to turn, the bonnet nut might be too tight. Try loosening the bonnet nut and reinstalling it, being careful not to overtighten it this time.
  • E
    Emily HallSep 8, 2025
    Why does water come out of the tub spout and showerhead at the same time in my Glacier Bay Kitchen & Bath Fixtures?
    • L
      Lauren HendersonSep 8, 2025
      If water is coming out of both the tub spout and showerhead simultaneously in your Glacier Bay Kitchen & Bath Fixtures, it could be due to several reasons: * The pipe between the valve and tub spout is not 1/2 in. IPS, or the copper pipe is incorrect; in this case, change the pipe to IPS or copper. * The distance between the valve and the showerhead is less than 48 in.; the distance from the showerhead and valve moved to at least 48 in.. * There may be a restriction between the valve and the tub spout; remove the tub spout and flush out any debris, and/or replace any undersized lines or fittings. * The valve might be installed upside down; remove the valve and reinstall it with the correct orientation.
  • F
    farleyjohnSep 12, 2025
    What to do if the handle cannot be installed on Glacier Bay Kitchen & Bath Fixtures?
    • D
      Dr. Angel Young DVMSep 12, 2025
      If you're having trouble installing the handle on your Glacier Bay Kitchen & Bath Fixtures, or if the handle rubs against the escutcheon, it's possible that the valve is installed too far back from the finished wall. Reinstall the valve (refer to Step 2 of the Installation section).

Summary

Pre-Installation

Planning Installation

Steps and considerations before starting the plumbing installation process.

Tools and Hardware Required

Lists necessary tools and materials for plumbing connections.

Package Contents

Lists all included parts with descriptions and quantities.

Installation

Preparing for installation

Steps before beginning faucet installation, including water shut-off and hole verification.

Installing the valve body and removing the plaster guard

Guides on installing the valve body and plaster guard correctly.

Installing the supply connections

Instructions for connecting water supply lines via threaded fittings.

Installing the supply connections (for soldering)

Instructions for connecting water supply lines using soldering.

Back to back installation

How to orient the valve for reversed hot/cold supply lines.

Flushing the water outlets and checking for leaks

Procedures for flushing the system and verifying for leaks.

Installing the plaster guard

Steps to place and secure the plaster guard onto the valve body.

Installing the shower arm

Instructions for installing the shower arm and flange.

Installing the tub spout

How to attach the tub spout using the provided hex wrench.

Removing the plastic cap

Instruction to remove a plastic cap before installing the escutcheon.

Adjusting the temperature

Guides on setting the maximum hot water limit stop.

Adjusting the desired maximum water temperature

Detailed steps to adjust the red limit stop ring for water temperature.

Installing the escutcheon and handle assembly

Steps for attaching the escutcheon and handle assembly.

Checking for leaks

Final checks for leaks after assembly and water flow activation.

Installing the shower head

How to attach the shower head to the shower arm.

Care and Cleaning

Troubleshooting

Service Parts

Glacier bay 1005877845 Specifications

General IconGeneral
Valve TypeCeramic Disc
MaterialMetal
ADA CompliantYes
WaterSense CertifiedYes
Number of Handles1
Mounting Number of Holes1

Related product manuals