Glbiotech BeneCheck Meter Kit User Manual

BeneCheck Meter Kit Meter (Front Side & Back Side)
BeneCheck Messgerät Messgerät (Vorderseite & Rückseite)
Battery Lid
Batterieabdeckung
Battery
Batterie
Back Setting Button
Einstellungstaste
Screw
Schraube
Meter Label
Messgeräteetikett
Test Port
Test-Port
LCD Screen
LCD-Display
UA
Front Button
Fronttaste

Glbiotech BeneCheck Meter Kit Specifications

General

Sample Volume (Cholesterol)	10 μL
Sample Volume (Uric Acid)	10 μL
Power Source	2 x AAA batteries
Sample Type	Whole blood
Measuring Range (Glucose)	20-600 mg/dL
Measuring Range (Cholesterol)	100-400 mg/dL
Operating Temperature	10-40°C (50-104°F)
Operating Humidity	Less than 85%
Intended Use	For quantitative determination of Glucose, Cholesterol and Uric Acid in capillary whole blood.

Summary

Product Introduction

Setting Up the Meter

Battery Installation and Replacement

Instructions for installing and replacing the CR2032 battery.

Setting Date and Time

Guide to setting the meter's date and time for accurate record keeping.

Meter Coding Procedure

Steps to code the meter, ensuring correct operation with test strips.

Performing a Glucose Test

Step-by-Step Test Execution

Step-by-step guide on how to conduct a test using the meter and strip.

Using Meter Memory Function

Accessing Stored Test Records

Instructions on how to access and review stored test results on the meter.

Control Solution Testing Procedure

Performing Control Solution Test

Guide to using control solution to verify meter and strip performance.

Meter Care and Maintenance

Proper Storage of Meter and Strips

Recommendations for proper storage of the meter and test strips to ensure longevity.

Cleaning the Meter Device

Guidelines for cleaning the meter surface using approved solutions.

Error Messages and Troubleshooting

Device Specifications