6
• Uric Acid - 180 results
The latest test result will replace the oldest when the records exceed maximum memory
capacity. The memories start record from M1 to M180.
Directions for Checking Memories:
No Test Strip in the Meter
→
Press Front Button (3 secs)
→
A Short “Beep” (Full
Display on Screen)
→
Press Front Button Again
→
Enter the Memory Mode
→
Press Front Button for Next Test Record
→
Press Back Setting Button (3 secs)
to Turn Off
Memory Records are shown as follows:
Chapter 4
Meter Memory Function
Test Record
Blink Blink
Control Record
To Next Page
Loading...