Glbiotech BeneCheck Meter Kit - Setting Up the Meter; Battery Installation and Replacement; Setting Date and Time; Meter Coding Procedure

2
2.1 Installing/ Replacing the Batteries
This meter uses a CR2032 battery. Please remove the plastic tab under the battery before
using. Note: Dispose the batteries according to your local environmental regulations.
2.2 Set the Date and Time
Press Back Setting Button (3 secs)
→
One “Beep” Sound
→
Setting Mode
→
Turn
Off Automatically after Setting
• Setting order: Year/ Month/ Date/ Hour/ Minute
• Press Front Button to advance one unit, Back Setting Button to enter next setting.
Note: Correct setting is important while managing your health records.
2.3 Code the Meter
• Code your meter when you rst use it or open a new vial of strips.
• Make sure the meter is off before you insert the code strip.
Chapter 2
Setting the Meter
1 2 3