Glide 4 Series User Manual

15
SECTION 9. TROUBLE SHOOTING
If your Power Chair will not go, follow this checklist
1. Check that the lights on control box are illuminated.
2. If there are no lights on controller, check that all leads/plugs, which connect to
controller, are pushed in properly.
3. Check that the motor cables are properly connected.
4. Check all battery wiring is connected.
5. Check that battery box connector is plugged in.
6. Check circuit breaker located on the battery box lid. The circuit breaker will
trip when the wheelchair is stalled for a prolonged period or if a major fault
has occurred. If circuit breaker continually trips for no apparent reason, cease
use and contact nearest Glide Rehabilitation Products service agent.
Important: Allow 60 seconds before resetting circuit breaker.
7. If you still have problems after reviewing the above checklist, please contact
your nearest Glide Rehabilitation Products Agent or Glide Rehabilitation
Products direct.

Glide 4 Series Specifications

General

Frame Material	Aluminum
Weight Capacity	300 lbs
Rear Wheel Size	24"
Front Wheel Size	8"
Foldable	Yes
Frame Type	Folding
Footrest Style	Swing-away
Seat Width	16", 18", 20"
Seat Depth	16"
Armrest Style	Desk-length