8
SECTION 4. FOLDING AND UNFOLDING YOUR POWER
CHAIR
Removal of battery Box
1. Unclip battery lead connector
2. Pull out both locking pins A (see diagram) and twist so they hold in the out
position
3. Lift battery box out using lifting strap (velcro lid retaining strap)
Folding of Power Chair
1. Lift up Left and Right footplates
2. Remove spreader bar (if fitted)
3. Lift seat upholstery directly upwards to fold chair
Assembly of Power Chair
1. Unfold chair taking care not to put your fingers under seat upholstery bar –
push down and out on seat upholstery bars.
2. Lift battery box into chair using lifting strap ( Velcro lid retaining strap)
3. Plug in battery lead connectors
Twist and push in both locking pins A (see diagram)
WARNING – Battery box weight over 16kg – Take care when handling
To Next Page
Loading...
