What to do if GLO HYPER AIR Electronic Cigarettes LED indicator flashes PINK once and makes a long buzz?
If your GLO Electronic Cigarettes device's LED indicator flashes PINK once and it makes a long buzz, this indicates a self-check error. To resolve this, reset the device by pressing and holding the upper (Boost) button for 10 seconds.
Why is my GLO HYPER AIR LED indicator blinking RED 3 times?
If the LED indicator on your GLO Electronic Cigarettes device blinks RED 3 times and then switches off, it means the battery charge is too low. You should recharge the device using the recommended charger and USB-C cable.
What to do if GLO HYPER AIR LED indicator flashes PURPLE twice and buzzes?
If the LED indicator on your GLO Electronic Cigarettes flashes PURPLE twice and the device buzzes once, it means the device is too cold. Move it to a warmer place (15-25°C) and wait at least 15 minutes.
What to do if GLO HYPER AIR LED indicator flashes PURPLE once and buzzes?
If your GLO Electronic Cigarettes LED indicator flashes PURPLE once and the device buzzes once, it indicates that the device is too hot. Allow the device to cool down for at least 15 minutes after your previous session. Ensure you are using the device within the recommended ambient temperature range of 15-25°C.
Explains LED indicator colors for device status and charging.
Provides instructions for cleaning the heating chamber and device.
General| Brand | GLO |
|---|---|
| Model | HYPER AIR |
| Category | Electronic Cigarettes |
| Language | English |
To Next Page
