G403/G403i/G403a/G404/G404a
Nicoventures Trading Ltd. (subsidiary of
British American Tobacco)
3
2 Product Description
2.1 General Description
The glo™ Hyper+ is a tobacco heating device which inductively heats rather than burns a consumable
rod of tobacco and is compatible with Demi-Slim size Neo™ consumables. As an upgrade from the
original glo™ Hyper, glo™ Hyper+ has an updated industrial design with factory-customisable side
panel and uses single-use, disposable, demi-slim size Neo™ consumables.
Figure 2.1 – (left) glo™ Hyper+ tobacco heater device, (middle) Neo™ demi-slim Consumable 20 pack,
(right) Neo™ demi-slim tobacco consumable
2.2 Operation
The consumable is inserted into the top device via a hole, with
the tobacco end of the consumable entering the device first.
The user presses and holds a single button on the front to
initiate the inductive heating of the consumable. The device
performs an initial pre-heating phase, indicated by LED lighting
and haptic vibration. When the pre-heating phase is complete,
the LED’s are fully lit, and a second vibration occurs. The device
is pre-loaded with 2 different heating profiles (standard and
boost). The user can choose to initiate either. These heating
profiles are initiated by holding the button for 3 seconds, or 5
seconds respectively.
The heater generates aerosol within the consumable
composed mainly of water, glycerine, nicotine, and flavour
designed to provide a consistent sensory experience.
The top end of the consumable protrudes from the device by
22mm through which the user can ‘puff’ on the consumable to
To Next Page
Loading...
Need help?
General
