Global Skyware 9013 - Tools Required

1.1 TOOLS REQUIRED
Compass Clinometer Torque Wrench
ADDITIONAL INSTALLATION MATERIALS (Not Included with Antenna)
Installaon Mount (Ground Pole, King Post, Wall Mount or Roof Mount)
Grounding Rod, Clamp & Grounding Block - As required by Naonal Electric Code or local codes.
Ground Wire - #10 solid copper or #8 aluminum as required by Naonal Electric Code or local codes (length as required).
RG-6 Coaxial Cables from antenna to indoor units.
Concrete: See “Ground Pole” secon for quanty
M10 or #3 Rebar: See “Ground Pole” secon for quanty. Deformed steel per ASTM A615, Grade 40 or 60.
9” Magnec Level #1 or #2 Phillips 3/8” Drive
Screwdriver Ratchet Wrench
5/16” Nut Driver 1/4” Socket (3/8” Drive) 1/4” Combinaon Wrench
5/16” Deep Socket (3/8” Drive) 5/16” Combinaon Wrench
2