Global 2200 - Keypad Operation; Parameters

7
KEYPAD
To change a parameter
 Press the up or down arrow until the display shows n -- then press enter.
 Press up or down to select the parameter to be changed then press
enter.
 Press up or down to select the required value then press enter.
 Press out to scroll back through the menus
Pause time
Rotate dial on keypad - adjustable from 1 to 120 second
Parameters
n11
High Speed opening 2750 rpm max
n12
Low Speed(deceleration) opening and closing 400rpm (default)
n13
% Partial opening position
n21
Logic
1=Timer
2=Security
3=Flip Flop
4=Step by Step
5=Step only
6=AP Semi auto
n22
High Speed close 2750 rpm max