Global 244280 - Unpacking and Setup

244280 www.globalindustrial.com 2
Humidity Range
<90% relative humidity, non-condensing
Power Supply
Lead-acid rechargeable battery or AC power adapter
(12Vdc/500mA with central positive)
External Interface
RS232
Safe Overload
Capacity
150% of capacity
Platter Dimensions (L
x W)
11.4” x 8.7” (290 x 220 mm)
Scale Dimensions(L x
W x H)
13.5” x 11.6” x 4.5” (294 x 342 x 115 mm)
2. Unpacking and Setup
 Remove the scale from the box and place it on a firm, level surface. Avoid locations with
rapid temperature changes, excessive dust, moisture, air currents, vibrations,
electromagnetic fields, heat or direct sunlight.
 Adjust the leveling feet until the bubble is centered in the circle of the
level indicator (located on the front panel).
NOTE: Ensure that the scale is level each time its location is
changed.
 The internal rechargeable battery should be fully charged for up to 12 hours before using
the scale for the first time.
 Connect the supplied AC adapter to the power input receptacle underneath the scale.
Plug the AC adapter into a properly grounded power outlet. The battery will begin
charging.
 If the scale will be stored or transported in the future, save the packaging material to
ensure the best possible protection for the scale.
Contents
 Scale
 12V 500mA AC adapter, UL
 User Manual