“Global Pool Products is committed to engineering and manufacturing world class products in the pool industry”
Global Pool Products
1330 Pigeon Rd
Bad Axe, MI 48413 Information contained in this document is proprietary and confidential to
P: 989-269-5900 - TF: 866-712-0606 Global Pool Products and not to be reproduced without
Fax: 989-269-5902 written consent from Global Pool Products.
www.global-poolproducts.com
Page | 22
9. Drive all anchors through the slide anchoring holes.
10. Expand anchors by tightening the nuts three to five turns. When the anchor is set, remove the nut
and install a lock washer, then retighten the nut to specified torque.
If installing pool slide as an aftermarket product and running the water from an alternate water
source other than pool plumbing, you will need to:
1. Cut a 4 ¾” access hole in the lower ladder section of the slide to access the flex hose using the
dimpled center mark in the rectangular area.
2. Assemble garden hose adapter and connect to water supply (garden hose).
To Next Page
Loading...
Need help?
General