Global TSUNAMI User Manual

27 pages

To Next Page

“Global Pool Products is committed to engineering and manufacturing world class products in the pool industry”

Global Pool Products

1330 Pigeon Rd

Bad Axe, MI 48413 Information contained in this document is proprietary and confidential to

P: 989-269-5900 - TF: 866-712-0606 Global Pool Products and not to be reproduced without

Fax: 989-269-5902 written consent from Global Pool Products.

www.global-poolproducts.com

Page | 1

www.global-poolproducts.com

TSUNAMI ASSEMBLY & INSTALLATION

GUIDE

Need help?

Do you have a question about the Global TSUNAMI and is the answer not in the manual?

Global TSUNAMI Specifications

General

Brand	Global
Model	TSUNAMI
Category	Play Sets & Playground Equipment
Language	English

Summary

Post Installation Checklist for Tsunami Slide

Examine Slide Components and Water Depth

Maintenance Instructions

Slide Maintenance Procedures

Tsunami Slide Placement/Stub-up Location

Tsunami Assembly Instructions

Pre-Assembly Preparation

Step 1: Attaching the Base to the Lower Flume

Instructions for connecting the slide base to the lower flume.

Step 2: Installing the Foam Gasket and Butyl

Steps for applying the foam gasket and butyl sealant to the lower flume.

Step 3: Attaching the Upper Flume to the Lower Flume

Procedure for joining the upper flume section to the lower flume.

Step 4: Attaching the Plumbing

Connecting the water delivery plumbing within the upper ladder.

Step 5: Attaching the Upper Ladder to the Lower Ladder

Securing the upper ladder section to the lower ladder using bolts and nuts.

Step 5.5: Installing the Dual Seal on the Upper Ladder

Step 6: Attaching the Ladder to the Flume Assemblies

Connecting the ladder assembly to the flume sections using bolts and studs.

Step 7: Installing Inner Connections

Securing inner connections between the ladder and flume, and checking for leaks.

Global TSUNAMI User Manual

Table of Contents